Handling and precautions for woodworking engraving machine
The performance of the woodworking engraving machine itself is important, but the choice of woodworking engraving tools also affects the machining effect and processing efficiency. If you pay for a penny, no matter what kind of things we buy, this sentence is very reasonable. Good woodworking engraving machine has a high machine configuration, good quality parts, and the price is definitely high.
Precautions for loading and unloading of woodworking engraving machine:
1. When cleaning, use a gasoline or WD40 cleaning agent to clean the chuck and pressure cap.
2. Put the chuck into the pressure cap, otherwise the cutter is not easy to install. If the chuck is not clamped in the pressure cap, the chuck will be caught in the motor shaft when the knife is unloaded.
3. Before clamping, pay attention to whether the chuck matches the selected tool, otherwise the tool cannot be tightened.
4. When clamping the tool, the part of the tool that protrudes out of the chuck should not be too long, otherwise it will easily generate vibration during the machining process, which will affect the processing quality of the workpiece surface.
5. When changing the tool, it must ensure that the spindle speed is zero, that is, the tool can be dismantled when the spindle is stopped, otherwise serious personal injury accidents may occur.
6. If you use the presser foot to engrave, you must use a vacuum cleaner to clean the dust on the presser foot and the spindle, and then clamp the tool.
7. In the process of screwing up the cap upwards, be sure to press the cap on the positive rotor thread, first by hand and screw it in place without any effort.
8. When unloading the knife, remove the scrap on the pressure cap and the rotor shaft before unloading the knife.
Precautions for loading and unloading of woodworking engraving machine:
1. When cleaning, use a gasoline or WD40 cleaning agent to clean the chuck and pressure cap.
2. Put the chuck into the pressure cap, otherwise the cutter is not easy to install. If the chuck is not clamped in the pressure cap, the chuck will be caught in the motor shaft when the knife is unloaded.
3. Before clamping, pay attention to whether the chuck matches the selected tool, otherwise the tool cannot be tightened.
4. When clamping the tool, the part of the tool that protrudes out of the chuck should not be too long, otherwise it will easily generate vibration during the machining process, which will affect the processing quality of the workpiece surface.
5. When changing the tool, it must ensure that the spindle speed is zero, that is, the tool can be dismantled when the spindle is stopped, otherwise serious personal injury accidents may occur.
6. If you use the presser foot to engrave, you must use a vacuum cleaner to clean the dust on the presser foot and the spindle, and then clamp the tool.
7. In the process of screwing up the cap upwards, be sure to press the cap on the positive rotor thread, first by hand and screw it in place without any effort.
8. When unloading the knife, remove the scrap on the pressure cap and the rotor shaft before unloading the knife.
Comments
Post a Comment