Single Spindle and Double Blades CNC Wood Lathe

Advantages of Single Spindle and Double Blades CNC Wood Lathe

1. Driving system: Adopt frequency conversion speed regulation system, could adjust the turning speed at any time to solve the problem of materials’ vibration.

2. The Wood lathe machine has 2 cutters (The Rough turning cutter and finish turning cutter work synchronously with layered process) and so that improve the efficiency and workpiece surface quality.

3. Spindle: we could configure single spindle with two pcs cutter or one pc cutter, single spindle could configure chuck, two cutters could do rough turning and finish turning at the same time for high efficiency and surface quality.

(Double spindles has stop to produce again.In fact,the model is not good to the turning the wood products, it is very slow when turning the big sizes column, and there have many defects at design to the Double Spindle lathe, Such as the Sanding, Centering, Programming,Upper Spindle Structural Stability etc.)

4. Linear square rails,ballscrews,and some electronic components are imported, high precision and durable.

5. Performance part: high accuracy stepper motor, after program calculating, guarantee the exact processing size.

6. Feeding part:Taiwan CSK high quality straight line sliding rails and TBI precise ball screw, control the linear error effectively.

7. High Class frequency converter with high stability

8. It is heavyduty and heavy weight with good stability,avoid shaking when the spindle rotates fast or the big sizes workpiece process, and the main spindle speed can be adjusted through the frequency converter.

9. Easy operation, we can draw by Coredraw,Artcam,autoCAD and other softwares, and the control directly by the CNC cabinet computer (Industrial PC configuration) ortransfer the files to Machine by a USB (DSP handle configuration).

Features of Single Spindle and Double Blades CNC Wood Lathe

1. CNC Wood turning lathe machine is welded with seamless steel structure, which is high temperature annealing and vibrating stress relief, so the lathe body is stabilized and will not be deformed forever.

2. Adopt frequency conversion speed regulation system, could adjust the turning speed at any time to solve the problem of materials’ vibration.

3. We could configure single spindle with two pcs cutter or one pc cutter, single spindle could configure chuck, two cutters could do rough turning and finish turning at the same time for high efficiency and surface quality.

4. High accuracy stepper motor, after program calculating, guarantee the exact processing size.

5. Taiwan Hiwin square rails and TBI precise ball screw, control the linear error effectively.

6. Easy operation, we can draw by autoCAD and other softwares, transfer the files to machine by a USB.

7. One time tool setting to finish the whole work piece.

Technical parameters of Single Spindle and Double Blades CNC Wood Lathe

Model	ZM-1530
Max processing length	1500mm(can custom 2000/2500/3000mm)
Max turning diameter	300mm
Air pressure	0.6-0.8Mpa
Powersupply	AC 380V 3 phase 50HZ/60HZ（can custom 220V）
Max feed rate	2000mm/min
min setting unit	0.01cm
Transimission type	ballscrew for X Z axis,gear for Y axis
Guider	Taiwan Hiwin orbit
Main shaft rotating speed	0-3000r/min
Motor power	4kw
Cutter material	Super hard alloy
Control System	DSP control system
Motor	Stepper motor
Driver	Yako driver
Inverter	Best inverter
Drawing Software	AutoCAD
Interface	Internet cable
Hand controller recognise file	*.dxf