Operation skills and precautions of woodworking carving machine
With the development of the times, woodworking carving machine products are more and more popular with consumers. In the process of carving, we need to pay attention to the operation skills of woodworking carving machine, so that the carved objects will not be misplaced, so as to avoid the damage of the carved objects to the greatest extent.
To avoid these problems, we can try the following:
1. check whether the pliers or card heads selected by the woodworking carving machine are used incorrectly? At the same time, the wear of pliers or card head of woodworking carving machine will also lead to the dislocation of the carved object. If the pliers or the clamp head is too tight, the moment when the knife head contacts the carved object will also lead to the ejection of the carved object.
2. For those sculptured objects with irregular shape, they seem to be fixed tightly on the surface, and they will shake back and forth when they are under pressure. At this point, try to put some waste under the object to increase friction. The other is to keep the package of the article. Although the object is irregular, the package it carries may be very regular and easy to be fixed. With a small belt, the irregular shape object is easy to be fixed. Or try to fix the regular parts with tools, and abandon the irregular parts.
3. If the downward pressure on the carved object is large, consider whether you have to use the tapered nose. If the pressure on the diamond head of the woodworking carving machine is too large when it moves during the carving process, the pressure on the side of the tool will cause the movement of the carved object. If an incorrect diamond knife is used, it can cause the same problem. A 90 or 100 degree diamond knife will go deep into the material and move the material as it is carved.
4. Because the woodworking carving machine is often equipped with multi-functional pliers or card heads, which are made of iron, it is easy to cause damage to the carved objects or make them slide down in the carving process, so it will help to select some rubber caps or rubber pipes for the fixation of the carved objects.
5. for engraving plastic patterns, you can paste the transfer tape on the back of the sculpture, spray the side with the tape with liquid spray adhesive, and then paste it on a surface that can be voided, so as to avoid the use of double-sided adhesive, leaving the surface that is difficult to clean. Because the transfer tape is easy to peel and clean. Use special engraved tape, one side of which is more sticky than the other, so the plate can be moved or replaced at will.
I believe that through the above knowledge explanation, you can understand the operation skills of woodworking carving machine and the precautions in daily use. I hope you can use the machine reasonably and improve the working efficiency.
4x8 cnc router
To avoid these problems, we can try the following:
1. check whether the pliers or card heads selected by the woodworking carving machine are used incorrectly? At the same time, the wear of pliers or card head of woodworking carving machine will also lead to the dislocation of the carved object. If the pliers or the clamp head is too tight, the moment when the knife head contacts the carved object will also lead to the ejection of the carved object.
2. For those sculptured objects with irregular shape, they seem to be fixed tightly on the surface, and they will shake back and forth when they are under pressure. At this point, try to put some waste under the object to increase friction. The other is to keep the package of the article. Although the object is irregular, the package it carries may be very regular and easy to be fixed. With a small belt, the irregular shape object is easy to be fixed. Or try to fix the regular parts with tools, and abandon the irregular parts.
3. If the downward pressure on the carved object is large, consider whether you have to use the tapered nose. If the pressure on the diamond head of the woodworking carving machine is too large when it moves during the carving process, the pressure on the side of the tool will cause the movement of the carved object. If an incorrect diamond knife is used, it can cause the same problem. A 90 or 100 degree diamond knife will go deep into the material and move the material as it is carved.
4. Because the woodworking carving machine is often equipped with multi-functional pliers or card heads, which are made of iron, it is easy to cause damage to the carved objects or make them slide down in the carving process, so it will help to select some rubber caps or rubber pipes for the fixation of the carved objects.
5. for engraving plastic patterns, you can paste the transfer tape on the back of the sculpture, spray the side with the tape with liquid spray adhesive, and then paste it on a surface that can be voided, so as to avoid the use of double-sided adhesive, leaving the surface that is difficult to clean. Because the transfer tape is easy to peel and clean. Use special engraved tape, one side of which is more sticky than the other, so the plate can be moved or replaced at will.
I believe that through the above knowledge explanation, you can understand the operation skills of woodworking carving machine and the precautions in daily use. I hope you can use the machine reasonably and improve the working efficiency.
4x8 cnc router
Comments
Post a Comment