Problems in using woodworking carving machine
Woodworking engraving machine is a kind of engraving machine specially designed for the customers of woodworking industry who have mass processing. It is suitable for carving and cutting cabinet doors, art relief screens, craft windows, furniture and works of art. For those sculptured objects with irregular shape, they seem to be fixed tightly on the surface, and they will shake back and forth when they are under pressure.
At this point, try to put some waste under the object to increase friction. The other is to keep the package of the article. Although the object is irregular, the package it carries may be very regular and easy to be fixed. With a small belt, the irregular shape object is easy to be fixed. Or try to fix the regular parts with tools, and abandon the irregular parts.
Check whether the pliers or card heads selected for carving are used wrongly. At the same time, the abrasion of the pliers or card heads of the woodworking carving machine will also lead to the dislocation of the carved objects. If the pliers or the clamp head is too tight, the moment when the knife head contacts the carved object will also lead to the ejection of the carved object. If the downward pressure on the carved object is large, consider whether you have to use the tapered nose. If the pressure on the diamond head of the carving machine is too large during the carving process, the pressure on the side of the tool will cause the movement of the carved object.
If an incorrect diamond knife is used, it can cause the same problem. A 90 or 100 degree diamond knife will go deep into the material and move the material as it is carved. For engraving plastic patterns, you can paste the transfer tape on the back of the object to be engraved, spray the side with the tape with liquid spray adhesive, and then paste it on a surface that can be discarded, so as to avoid the use of double-sided adhesive tape, leaving a surface that is difficult to clean.
Because the transfer tape is easy to peel and clean. Use special engraved tape, one side of which is more sticky than the other, so the plate can be moved or replaced at will. Because the woodworking carving machine is often equipped with multi-functional pliers or card heads, and they are made of iron, so it is easy to cause damage to the carved objects or make them slide down in the carving process, so it will be helpful to select some rubber caps or rubber pipes for the fixation of the carved objects.
At this point, try to put some waste under the object to increase friction. The other is to keep the package of the article. Although the object is irregular, the package it carries may be very regular and easy to be fixed. With a small belt, the irregular shape object is easy to be fixed. Or try to fix the regular parts with tools, and abandon the irregular parts.
Check whether the pliers or card heads selected for carving are used wrongly. At the same time, the abrasion of the pliers or card heads of the woodworking carving machine will also lead to the dislocation of the carved objects. If the pliers or the clamp head is too tight, the moment when the knife head contacts the carved object will also lead to the ejection of the carved object. If the downward pressure on the carved object is large, consider whether you have to use the tapered nose. If the pressure on the diamond head of the carving machine is too large during the carving process, the pressure on the side of the tool will cause the movement of the carved object.
If an incorrect diamond knife is used, it can cause the same problem. A 90 or 100 degree diamond knife will go deep into the material and move the material as it is carved. For engraving plastic patterns, you can paste the transfer tape on the back of the object to be engraved, spray the side with the tape with liquid spray adhesive, and then paste it on a surface that can be discarded, so as to avoid the use of double-sided adhesive tape, leaving a surface that is difficult to clean.
Because the transfer tape is easy to peel and clean. Use special engraved tape, one side of which is more sticky than the other, so the plate can be moved or replaced at will. Because the woodworking carving machine is often equipped with multi-functional pliers or card heads, and they are made of iron, so it is easy to cause damage to the carved objects or make them slide down in the carving process, so it will be helpful to select some rubber caps or rubber pipes for the fixation of the carved objects.
Comments
Post a Comment