DM-A4-2 Four Process Double Station CNC Cente

Features

  • Equipped with computer optimization layout software, saving plate, improve utilization.
  • The whole process of numerical control, reducing the professional and technical personnel requirements.
  • Easy to operate, 1 day training can be on the job.
  • The machine can work alternately at two stations to increase production efficiency. The daily output can reach 60~80 sheets.
  • Left station processing, right station refueling, alternating, so that the host sustainable production, to achieve the purpose of improving efficiency.
  • Either custom or engineering orders can handle it.
  • Shaped cutting, without drawing.
  • The four main pumping respectively clamp 15mm, 10mm, 8m, 5mm tool, to meet the cabinet wardrobe perforating, grooving, cutting and other functions.
  • Significantly reduce the risk of occupational injuries, sustainable and safe production.
  • Unloading plate material, precision guarantee zero error.

Specification

Items
DM-A4-2
Table Area
1220 x 2440 mm
Traveling Area
1320 x 2540 x 250 mm
Traveling Speed
60 m/min
Working Speed
15 m/min
Spindle Power
6 Kw / 6 Kw / 3.5 Kw / 3.5 Kw
Spindle Speed
18000 r/min
Working Voltage
AC 380V / 3 PH / 50 Hz
Driving System
DELTA
Controller
LNC
Locate Mode
Positioned in three points by portable high precision positioning cylinder

(2 in X Axis + 1 in Y Axis)
Table Structure
Vacuum

Comments

Post a Comment

Popular posts from this blog

CNC ROUTER RC 1325K2 Cabinet production line

Image
    1. Introduction of CNC Machine for Wood Cabinet   The machine is our newly-developed CNC Router with combined function of material loading and unloading for cabinet-making, widely used in home decoration, shop and office furniture. It is equipped with Italy HSD Spindle, Italy Boring unit and advanced Syntec control system, Japanese Yaskawa servo and Taiwan reducers.   2. Important Features of CNC Machine for Wood Cabinet Fast material loading and unloading. Strong vacuum table to suck tightly of the work piece. Highly efficient dust collection system, ensuring of the flatness of tale surface all the time. Multi-function drilling with vertical, side, single and group drilling, etc
Read more

Common knowledge of CNC engraving machine

The development of knowledge and technology of CNC engraving machine makes advanced technology continuously applied to various industries, which reduces the technical cost of the industry and improves the performance cost. The engraving machine has been in use for more than 10 years from research and development to the present, and the technology is constantly improving. Laser engraving machines use laser instruments to make machines that work faster. As the core technology of the engraving machine – CNC technology, this technology is the premise that the engraving machine can successfully complete all kinds of gorgeous carving. So how does the CNC engraving machine work? Why can you engrave in a certain pattern? Although these are irrelevant things for people who buy engraving machines, it is ok to understand them. The CNC engraving machine is an automated machine tool with a program control system that can operate and machine parts according to programmed programs. Different type...
Read more

What is a CNC router? Why use it over other tools?

CNC, or Computer Numerically Controlled, is a process by which a machine tool may use files developed on a computer with a proper program to produce things. There are good and not-so-good things about using a  CNC router . I will assume that your product is wood and in a single-plane like a flat board rather than multiplane such as a statue since with this is what I have the most experience: 1) If you have any inside corners they can be tricky. Routers use round bits so inside corners will not be sharp unless you use some very tricky manipulations; 2) If the cuts are very fine then you will have to use small tools. You can only make a small shaping tool “so small” and “so long” before it doesn’t do the job… if you have a 3mm slot through a 30mm item the chances for success are, um, limited; 3) With flat cut items it is usually MUCH faster to use an appropriate saw and do it by hand rather than attempt to program it on a CNC. I once developed an item where each part had to fi...
Read more