Disposable Facial Protective Respirator KN95 FFP2 FFP3 Face Mask

Disposable Facial Protective Respirator KN95 FFP2 FFP3 Face Mask

Product Features:

1. Disposable, single-use, breathable, light and environment-friendly;

2. High elasticity ear loop help fit different users and dual point attachment helps provide a secure seal;

3. Adjustable nose piece for extra comfort;

4. At least 99% filtration efficiency against certain non-oil particles.

Points for Attention: 

1. This product is prohibited to be used with damaged package;

2. Do not use in atmospheres containing less than 19.5% oxygen, as this respirator does not supply oxygen; Not for use in oil mist atmospheres;

3. If the product becomes damaged, soiled, or breathing becomes difficult, leave the contaminated area immediately and replace the product;

4. This product is one-time use only and can not be washed;

5. This product should be stored in a clean, dry and ventilated environment with relative humidity less than 80% and without harmful gas.

UNISOURCES GROUP, which was first established in 1998, is a comprehensive enterprise focusing on the strategic layout of "breathing health" integrating R & D, production and sales. Served the top 5 industry customers in each country in the world, and provided "Air and Dust Separation" IAQC (Indoor Air Quality) technical support for world-class companies such as 3M, Bosch, and Panasonic.

Contact: https://www.unisourcesgroup.com/

Comments

Post a Comment

Popular posts from this blog

CNC ROUTER RC 1325K2 Cabinet production line

Image
    1. Introduction of CNC Machine for Wood Cabinet   The machine is our newly-developed CNC Router with combined function of material loading and unloading for cabinet-making, widely used in home decoration, shop and office furniture. It is equipped with Italy HSD Spindle, Italy Boring unit and advanced Syntec control system, Japanese Yaskawa servo and Taiwan reducers.   2. Important Features of CNC Machine for Wood Cabinet Fast material loading and unloading. Strong vacuum table to suck tightly of the work piece. Highly efficient dust collection system, ensuring of the flatness of tale surface all the time. Multi-function drilling with vertical, side, single and group drilling, etc
Read more

Common knowledge of CNC engraving machine

The development of knowledge and technology of CNC engraving machine makes advanced technology continuously applied to various industries, which reduces the technical cost of the industry and improves the performance cost. The engraving machine has been in use for more than 10 years from research and development to the present, and the technology is constantly improving. Laser engraving machines use laser instruments to make machines that work faster. As the core technology of the engraving machine – CNC technology, this technology is the premise that the engraving machine can successfully complete all kinds of gorgeous carving. So how does the CNC engraving machine work? Why can you engrave in a certain pattern? Although these are irrelevant things for people who buy engraving machines, it is ok to understand them. The CNC engraving machine is an automated machine tool with a program control system that can operate and machine parts according to programmed programs. Different type...
Read more

What is a CNC router? Why use it over other tools?

CNC, or Computer Numerically Controlled, is a process by which a machine tool may use files developed on a computer with a proper program to produce things. There are good and not-so-good things about using a  CNC router . I will assume that your product is wood and in a single-plane like a flat board rather than multiplane such as a statue since with this is what I have the most experience: 1) If you have any inside corners they can be tricky. Routers use round bits so inside corners will not be sharp unless you use some very tricky manipulations; 2) If the cuts are very fine then you will have to use small tools. You can only make a small shaping tool “so small” and “so long” before it doesn’t do the job… if you have a 3mm slot through a 30mm item the chances for success are, um, limited; 3) With flat cut items it is usually MUCH faster to use an appropriate saw and do it by hand rather than attempt to program it on a CNC. I once developed an item where each part had to fi...
Read more